background image

Purpose

Power used

Heating and storage of domestic hot water

Electricity

Cor-émail Electric Water Heaters

Capacity: 10 - 500 litres

1. General Information

All Cor-émail water heaters have an internal lining made of vitreous enamel
with a high quartz content which is appropriate for food use. The enamel pro-
tects the tank from corrosion and ensures that the hot water is well preser-
ved and kept clean. This protection is optimized by the Integrated Anti Corro-
sion system (ACI) non-consumable titanium anode and efficiency indicator
light. (Except on 400 and 500 l floor-standing models, which are fitted with a
magnesium anode)
In most Cor-émail water heaters (except 400 and 500 L and compact

models), the resistor is coiled on a steatite support and inserted in a sleeve
which protects it from scale. In this way, there is no need to drain the water
heater to have access to the resistor.
The anti-splash plug fitted on the cold water inlet ensures that layers of hot
and cold water are stratified perfectly, thereby optimising the quantity of hot
water available.
Cor-émail electric water heaters are available in different versions which
cover all applications.

D E

D I E T R I C H

T H E R M I Q U E

S o c i é t é   A n o ny m e   a u   C a p i t a l   d e   2 1   6 8 6   3 7 0 , -   E u r o s

BOITE POSTALE 30  •  57, RUE DE LA GARE  •  F 67580 MERTZWILLER  •  TELEPHONE : 03 88 80 27 00  •  FAX : 03 88 80 27 99

Vertical wall-mounted water heaters: 

50 - 200 litre standard heaters

(p. 4). These highly aesthetic heaters may be mounted on a wall or placed on a
stand. Thanks to their small dimensions, they may also be fitted inside a wall cup-
board. They are equiped with the ACI System which is fully corrosion proof system.
It ensures that the tank is kept well protected from corrosion.

Free-standing water heaters: 

150-500 litres (p. 6).

These are designed to be placed directly on the floor (in garages, base-
ments, boiler rooms etc.) especially when the walls are not strong enough to
take a 150 or 200-litre wall-mounted model.

Compact water heaters: 

10 - 30 litres (p. 3).

These aesthetic heaters heat the water very quickly and may be installed with
an inlet control system, either in an overhead location (above the sink, 10, 15
and 30 litres) or in a low position (below the sink, 10 or 15 litres). They may
also be pressurised and used to supply hot water to several tapping points.

Horizontal water heaters: 

75 - 200 litres (p. 5).

Their multiple position support makes it possible to mount them on a wall or
under the ceiling or place them on the floor.

8971Q002

8971Q003

8971Q001

8971Q004

Summary of Contents for Cor-email









Reviews: