4 Description of the product
4.1
General description
The VM Diematic Evolution box can be used as an extension box to
increase the number of secondary zones that are controlled, including the
domestic hot water and the swimming pool.
The box is fully compatible with the new D-Evolution control system range
and backwards compatible with Diematic, but only in slave mode.
The box is:
fully compatible with the new D-Evolution control system range
backwards compatible with Diematic control systems, but only if
connected in slave mode.
4.2
Main components
1 Door
2 Access cover to the connection terminal block
3 Diematic Evolution control panel
4 Technical service connector
5 ON/OFF switch
6 EEC-01 PCB
7 CB–05 PCB
8 S-Bus sockets
4.3
PCBs
4.3.1
Description of the EEC-01 PCB
Different heating zones can be connected to the EEC-01 PCB. Two zones
are designated for heating and one for domestic hot water. The
connections for the sensors or pumps of each zone are on the PCB.
The EEC-01 PCB can also be used for cascade regulation.
Fig.4
1
5
4
3
2
8
6
7
MW-1001099-1
4 Description of the product
10
7703592 - v02 - 14062018