23
KD2 Pro Operator’s Manual
3. The Menus
4. Press Enter to move to the next number, and repeat step
#3. If you need to return to the previous number, press
Escape.
5. When you have finished changing the last number, press
Enter and you will be returned to the Configuration
Menu.
UNITS:
You can choose to represent measurement data in
either SI or English units. Press Enter to select an option.
When you return to the Main Menu, pressing the arrow keys
allows you to scroll through and change the current unit and
measurement type.
NOTE: Readings in watts per meters-degree Celsius W/
(m °C) are the same as readings in watts per meters
Kelvin (W/m· K), as Celsius and Kelvin degrees are on
the same temperature scale.
READ TIME:
Allows you to change the read time duration
for each sensor type. To change a read time select the sensor
and press enter. Using the up/down arrows to select the new
read time. Press enter to save the changes or ESC to cancel
SI and English Unit Equivalents
Thermal
Conductivity
(K)
Thermal
Resistivity
( )
Volumetric
specific heat
(C)
Thermal
Diffusivity
(D)
SI
W
(m· K)
°C · cm
W
MJ
(m
3
· K)
mm
2
s
English
BTU
hr· ft °F
hr· ft °F
BTU
BTU
°F· ft
3
ft
2
hr
