DE
TOEKOMST
E E N V I S I E O P Z I T T E N
ALGEMENE INFORMATIE
TWICE
User manual for your Twice chair
Congratulations, you have chosen a relaxing chair from the Twice range. Once you have read this manual we wish you
relaxation and comfort and pleasure from your chair. So read through this manual carefully before using your chair.
1.
The first time you use the chair
1.1
Positioning
a.
The chair must be placed on a flat floor. Take into account the floor when positioning your chair.
With floors susceptible to scratching, it is advisable to place small felt mats under the chair’s feet to prevent damage.
We accept no liability for damage to flooring caused by the chair.
Never pick your chair up by the arms. When moving the chair, pick it up by the bottom of the arms or the side panels.
b.
Your chair is supplied with a battery as standard. You must charge this up after unpacking the chair. The battery is not fully
charged when it leaves the factory. You can read how to charge the battery in 3.3.
c.
If your electrically adjustable chair is equipped with a transformer, connect it directly to the chair, then put the plug in the socket.
d.
To prevent your chair from being discoloured or deformed, avoid placing it in direct sunlight or near an open fireplace or wood
burner.
1.2
Safety
When operating your chair, make sure that children or pets cannot get trapped between moving parts. Do not let children operate the chair
or play with it!
2.
Operating the chair
2.1.1 Control panel (Fig. 1). For Twice chairs without a riser function
All Twice chairs are fitted as standard with a control panel in the right arm (from the sitter’s viewpoint). Depending on the model, it may
be that the controls are incorporated into the seat. With the front two buttons you control the footrest and the “heart balance” position and
with the back two buttons you control the backrest. Pressing the front button makes the footrest come out, then it switches to the “heart
balance” function. To return to the neutral position, press the second button. To move the backrest, press the last button to move it back
and with the third button move the backrest forward again. While you are operating the chair, little indicator lights behind the buttons shine
green.
2.1.2 Control panel (Fig. 1). For Twice chairs with a riser function
If you have chosen a Twice chair with a riser function, this is equipped with the same control panel. To operate the riser function, from the
neutral position press the second button to move the chair “up”. Keep the button pressed in until the chair is fully raised and then just
stand up out of the chair. If you have sat back down in the chair and you want to return to the neutral position, press the first button so
that the chair goes back down. Keep the button pressed in until the chair is fully “down”. If you now wish to operate the footrest,
just release the first button and then press it again. The footrest will then come out and then switch to the “heart balance” position. To
return to the neutral position, press the second button. If you want to go straight on to the raised position you only have to release the
button and then press it again. To adjust the backrest, press the last button to move it back and with the third button you can move the
backrest forward again. While you are operating the chair, little indicator lights behind the buttons shine green.
SAFETY
Have you selected a chair with a riser function? The chair is equipped with a brake that holds the chair in a fixed position when
you want to use the riser function. If you want to get out of the chair or if you want to sit down in the chair while the chair is in
riser mode, you can only do so when the chair is fully up. At that point, the chair is fully braked and it can no longer rotate. If
the chair is not up, it is still possible for the chair to rotate, so you cannot sit down. We are not liable for damage or injury
resulting from incorrect use of the riser function.
DE
TOEKOMST
E E N V I S I E O P Z I T T E N
GENERAL INFORMATION
TWICE
