0
1
N
E
R
I
&
H
U
PARTS
1x Headboard
1x Footboard
2x Sidebeams
2x Crossbeams
16x Timber slats (NOTE: California King size has 17x Timber slats plus
2x additional M5x40 bolts and washers)
HARDWARE
(16x) M8x30 bolts
(8x) M8x35 bolts
(32x) M5x40 bolts
(32x) M5 washers
YOU WILL NEED
-5mm socket/ratchet set OR cordless drill with the appropriate
attachment
-5mm Allen Key
-The help of a friend
NOTES
NOTE 1: Be certain that all assembly is carried out on a flat
and stable surface. This will ensure a good final result.
Reverse the steps to disassemble the piece.
NOTE 2: Your furniture arrives packed in numerous layers that
protect it during transport. It is important that you remove
the packaging carefully to avoid damaging your furniture. Refer
to our information sheet “Unpacking Your Furniture” for further
details.
NOTE 3: Great care is required when assembling our products .
Use blankets to soften the assembly surface - hard surfaces
such as wood or stone flooring may damage the furniture if in
direct contact.
NOTE 4: We advise that assembly and disassembly of De La Espada
furniture is undertaken by a minimum of 2 people.
NOTE 5: When screwing in bolts, tighten well, but be sure
NOT TO OVERTIGHTEN. This can cause the thread to strip thus
resulting in a poor connection.
NOTE 6: All mating parts are numbered so they correspond to
the appropriate part around the frame of the bed. you will
ensure the best possible fit if all parts are mated with the
corresponding numbered parts. While you work, be sure all
connections are flush with no gaps.
ASSEMBLY INSTRUCTIONS
FRAME BED WITH ARMS BY NERI&HU
DELAESPADA.COM
