Page 7/14
December 2020
ROTARY MOWER | User manual
4.
WORKING METHOD AND USE OF THE MOWER
Prior to use, the safety instructions given in Chapter 2 must be observed!
•
Only work with coupling rods that move freely upward such that the mower runs horizontally and on its own
four swivel casters.
•
The traveling wheels can be adjusted to set the working height (mower height).
•
Take care that the shaft with universal joint is as level as possible when in the working position.
•
Check the safeguards of top link pin and lifting rod pins.
•
If the mowing height is set too low, the blades usually make too much contact with the ground and the machine
will be damaged.
•
If required, untangle the chain links.
•
Work only at a power take-off rotation of 540 rpm.
•
After every working day, the mower must be cleaned carefully so that no grass and/or sand residue remains
stuck anywhere on the system and hardens. Park the combination with the mower on flat surface.
•
Do not stand on the machine if the blades are still rotating!