Data Device Corporation
SB-36230KX Manual
Rev G – 4/19
3
2
OVERVIEW
The
SB-36230KX
is a half-length PCI Express x1 card which contains six fully
independent Digital-to-Synchro/Resolver channels. This form factor is designed for
use in standard desktops or servers that provide a standard height PCI Express slot.
The PCI Express specifications require interoperability of the x1 card in any link width
PCIe slot (x1, x4, x8 or x16) and any current PCIe generation (1.0a/1.1/2.0).
The operating temperature range for these environments is 0°C to +55°C with air
exchange inside the enclosure. All I/O connections are made via a single connector
on the standard I/O bracket.
Each channel can be software programmable for either Synchro or Resolver signal
formats.
2.1 Features
•
Half Length, Standard Height PCI Express x1 Form Factor
•
Six independent Digital-to-Synchro/Resolver channels
- Output amplitude options:
o
0 to 13.6 Vrms Synchro/Resolver
o
0 to 90 Vrms Synchro at 360 Hz to 1 kHz (transformer isolated)
- DC to 10 kHz operating carrier frequency
- 30 Arc seconds accuracy
- 10 – 16 bit programmable resolution
- Up to 15 mA max output drive (with 0-11.8V ordering option)
- Programmable dynamic rotation (Up to 7099 rps)
- Programmable two-speed simulation
- Over-current/thermal protection
- Loss-of-reference detection
- Any Simulation Channel can be Used as a Sine Reference Oscillator
•
On-board reference oscillator
- Output types:
o
0 to 26 Vrms (360 Hz to 11 kHz)
o
0 to 115 Vrms (360 Hz to 1 kHz)
- Up to 60 mA output drive (with 0-11.8V ordering option)
- Transformer isolated
