F U N C T I O N C A L L S
void WINAPI Enable_Rotation(int Card, int Channel)
DESCRIPTION
This routine puts the card into Dynamic Rotation Mode without starting the rotation.
INPUT DATA
Card = an integer between 0 and 7 for the card of interest. The card number is set in the
MOTION FEEDBACK BOARD MANAGER.
Channel = an integer between 0 and 5 for the channel of interest.
RETURNED DATA
This routine does not return any data.
EXAMPLE CODE
Code Result/Returned
Data
Enable_Rotation(0,1);
Puts card #0, channel 1 into
Dynamic Rotation Mode.
Data Device Corporation
SB-3622X Manual
36
Summary of Contents for DRC-11525
Page 3: ......
