S O F T W A R E I N S T A L L A T I O N
Data Device Corporation
BU-67121W Manual
Rev B – 6/16
37
Figure 30. Programming new firmware
Once the firmware has completed you will see a success message and it will ask you
to
Power cycle
the device in order for the firmware to complete.
You can use the
shutdown –h now
command to safely turn off your AIC.
7.2.2 Updating the firmware via Web browser
You can also update the AIC via the web browser. By going into your browser of
choice, you can enter the IP address of your AIC into the url bar.
This will bring up a prompt and ask you for credentials to access the AIC’s web page.
Log in using your credentials.
Default Credentials:
Username:
ddc
Password:
ddc
Upon entering the web page, you will see a menu on the left hand side.
Choose Device Information.
