dCS Paganini Upsampler
User Manual
Software Issue 1.1x
March 2011
Filename: Paganini Upsampler Manual v1_1x.docx
Page 9
English
version
STEP 3 – Connecting an Output
Choose which output interface you want to use and connect it up as described below. You can
connect as many outputs as you wish.
!
If the output format is not compatible with a particular interface, that interface will not be
active (for example, the
AES1
output cannot carry DSD).
The Upsampler will not output sample rates that are lower than the input sample rate.
Single wire PCM
Connect one or more of the PCM outputs (
AES1
,
AES2
,
RCA1
,
RCA2
) to matching inputs on your
DAC. Use the
OUTPUT
button on the front panel to set the output sample rate to 32, 44.1, 48, 88.2 or
96kS/s. Use the DAC’s
INPUT
button to select that input.
Paganini DAC
Paganini Upsampler
SUC
RCA 1
RCA 2
RCA1
AES2
W/CLK
IN
~ 50/60 Hz, 30W
Fuse T 500mA L
W/CLK
OUT
dCS Model: Paganini Upsampler
PUSH
AES 1
USB
RCA2
AES1
DIGITAL (PCM) OUTPUTS
DIGITAL (PCM) INPUTS
1394
SUC
RCA 1
RCA 2
LEFT
RIGHT
W/CLK
IN
~ 50/60 Hz, 30W
Fuse T 500mA L
W/CLK
OUT
dCS Model: Paganini DAC
PUSH
PUSH
AES 1
AES 2
RIGHT
LEFT
ANALOGUE OUTPUTS
DIGITAL INPUTS
1394
Figure 1 – Connecting the single-wire outputs
Go to STEP 4.