DCS Delius User Manual Download Page 50 | Manualshive

Page: 50 / 80

DCS Delius User Manual Download Page 50

dCS Delius

User Manual

Manual for Software Issue 2.3x

dCS

Ltd

September 2004

Manual filename: Delius Manual v2.3x.doc

Page 50

email: [email protected]

English version

web-site: www.dcsltd.co.uk

G

ENERAL

T

ECHNICAL

I

NFORMATION

IEEE 1394 Overview

The IEEE 1394 interface is a high speed multi-channel system. It has the
capacity to carry over 50 channels of DSD (Direct Stream Digital) or over 30
channels of 24 bit / 192kS/s audio data through a single cable.

From October 2001 onwards, a pair of 6-way electrical IEEE 1394 interfaces
running at 200Mbit/s are available on the following

dCS

products:

•

dCS Elgar Plus

DAC, standard fit with software version 4.10 or later.

•

dCS Delius

DAC, optional fit with software version 2.10 or later.

•

dCS Purcell

Upsampler, optional fit with software version 2.11 or later.

•

dCS Verdi

SACD/CD Transport, standard fit.

•

dCS Verdi La Scala

Upsampling SACD/CD Transport, standard fit.

In the current implementation,

Purcell

can upsample standard digital formats

(such as CD at 44.1kS/s 16 bits) to DSD at 2.822MS/s and output a stereo pair
of DSD data onto its 1394 interface.

Verdi

can read DSD data from an SACD

and output a stereo pair of DSD data onto its 1394 interface. The data is
encrypted to conform to the conditions of the DSD licensing arrangements.
Either

Elgar Plus

or

Delius

will accept DSD data from the 1394 interface and

convert it to high quality analogue.

The hardware interface is very flexible and software configurable. We will add
other features and data formats at a later date, adopting industry standard
formats as they stabilise.

Synchronising IEEE 1394 interfaces

The IEEE 1394 system is great for carrying large amounts or digital audio data
– but is inherently very jittery. To ensure low-jitter conversion to analogue, each
unit linked by the 1394 system must be synchronised to the others by another
connection.

•

A DAC in slave mode should be sync’ed to

Verdi

by connecting

Verdi

’s

WClk Out

to the DAC’s

WClk In

.

•

A DAC in master mode should sync

Verdi

by connecting the DAC’s

WClk

Out

to

Verdi

’s

WClk In

.

•

An Upsampler should be slaved to

Verdi

, usually by the selected PCM input

(

AES

or

RCA

).

Automatic Input Selection

From October 2002 onwards, the software on the following products has been
enhanced to automatically select the interface carrying data from

Verdi

:

•

dCS Elgar Plus

DAC, standard fit with software version 4.20 or later.

•

dCS Delius

DAC, optional fit with software version 2.20 or later.

•

dCS Verdi

SACD/CD Transport, standard fit with software version 1.20 or

later.

•

dCS Verdi La Scala

Upsampling SACD/CD Transport, standard fit, with the

Easy Play

menu set to

Verdi

.

The system relies on a 1394 link between

Verdi

and the DAC. The DAC will

automatically change inputs whenever

Verdi

changes layer or starts playing.

«
...
48
49
50
51
52
...
»

Summary of Contents for Delius

















































































Reviews:

No comments