MODEL CMOTTK30 CONVECTION MICROWAVE TRIM KIT
INSTALLATION INSTRUCTIONS
Before installing trim kit, install the convection duct as follows:
1.
Insert the rear section of the duct into the forward section of the duct and install 4 screws supplied
(Fig. 01).
2.
Install foam tape on 2 flanges of the rear section of the duct (Fig. 02).
3.
Remove and retain the 2 top screws, left and right, located at the rear vertical edges of the Microwave
(Fig. 03).
4.
Place the duct on top of the Microwave and reinsert the 2 screws removed in Step 3 (Fig. 04).
Before you begin, read these instructions completely and carefully.
Getting Started
■
Remove packaging
Contents
Tools Required
Part Description
Qty
Trim Assembly
1
Base
1
Rear Duct
1
Forward Duct
1
Foam Tape
2 ft
Mounting Bracket (L/R)
2
Sheet Metal Screws
14
1/8” Drill
#2 Phillip Screwdriver
Fig. 01
Fig. 02
Fig. 03
Fig. 04
4 Screws
Foam Tape
Foam
Tape
