DCS AERGES MIRAGE F1, Flight Manual

Page: 40 / 132

DCS: Mirage F1 Flight Manual Version 1.0
40
Failure lights
- Amber ELEV (EMP): Failure or disconnection of the first pitch electric circuit. If no other
pitch warning light is on, the second pitch electric circuit is operational and the aircraft
behaves normally. Resetting of the circuit should be attempted with the Servo Reset
pushbutton.
- Amber PITCH (TANG) + ROLL (ROUL) + ELEV (EMP): Failure or disconnection of both pitch
electric circuits. The aircraft is in full manual hydraulic mode for pitch. Autopilot is no
longer available. Resetting of the circuits should be attempted with the Servo Reset
pushbutton.
- Amber RUD (DIR): Failure or disconnection of the first yaw electric circuit. If no other
yaw warning light is on, the second yaw electric circuit is operational and the aircraft
behaves normally. Resetting of the circuit should be attempted with the Servo Reset
pushbutton.
- Amber YAW (LACET) + ROLL (ROUL) + RUD (DIR): Failure or disconnection of both yaw
electric circuits. The aircraft is in full manual hydraulic mode for yaw. Anti-slip and
autopilot are no longer available. Resetting of the circuits should be attempted with the
Servo Reset pushbutton.
- Amber ROLL (ROUL): Differential stabilator deflection not functional. Autopilot is no
longer available.
- Amber TRIM light: automatic trim failure. It doesn’t affect the autopilot or trim function.
Figure 3-37 Control Stick Figure 3-38 Rudder Trim Control Switch
1 TRIM HAT
1