602 Tremaine Avenue
Palmerston North
06 3590834
CAUTION
1.
Please read any battery cautions prior to charging!
2.
When charging, batteries can emit explosive gases therefore it is essential
to prevent flames and sparks. The charger is designed for charging sealed
lead-acid batteries from 2 to 60 Ah - to an end voltage of 14.4V / 14.7V.
3.
Always provide good ventilation when charging.
4.
To reduce risk of damage to electric plug and cord, pull by the plug rather
than by the cord when disconnecting charger.
5.
An extension cord should not be used unless absolutely necessary. Use of
an improper extension cord could result in a risk of fire and electric shock.
6.
Do not operate charger with a damaged cord or plug. Return the charger to
the place where purchased for repairs.
7.
Never operate the charger if it has received a sharp blow, been dropped or
otherwise damaged in any way. Take it to a qualified serviceman for testing.
8.
Do not disassemble the charger; take it to a qualified serviceman when
service or repair is required. Incorrect reassembly may result in a risk of
electrical shock or fire.
9.
To reduce risk of electric shock, unplug charger from AC outlet before
attempting any maintenance or cleaning. Turning off controls will not reduce
the risk.
Made in China
DC120833
12V Sealed Lead-Acid Battery Charger
Operating
Instructions
