background image

855.SHOP.DCD  l  DCDdrain.com

10

!

 WARNING

Unintentional sparking can result in fire or electric shock.

When Adjusting or Making Repairs to Your Sewer Jetter

 

• Disconnect the spark plug wire from the spark plug and place the wire where it cannot  

contact spark plug.

When Testing for Engine Spark

 

• Use approved spark plug tester.
•DO NOT check for spark with spark plug removed

!

 WARNING

The high-pressure stream of water that this equipment produces can cut through 

skin and its underlying tissues, leading to serious injury and possible amputation. 
Spray gun traps high water pressure, even when engine is stonned and water is 

disconnected, which can cause iniurv.

• DO NOT allow children to operate the sewer jetter. 

• NEVER repair the high-pressure hose. Replace it. 

 

• NEVER repair leaking connections with sealant of any kind. Replace o-ring or seal. 

 

• NEVER connect high pressure hose to nozzle extension. 

 

• Keep high pressure hose connected to pump and spray gun while system is pressurized. 

 

• ALWAYS point spray gun in safe direction and squeeze spray gun trigger to release high pressure 

every time you stop engine.
• NEVER aim spray gun at people, animals, or plants.
• DO NOT leave spray gun unattended while machine is running.
• NEVER use a spray gun which does not have a trigger lock or trigger guard in place and in 

working order.

• Always be certain spray gun, nozzles and accessories are correctly attached before  

spraying water.

Summary of Contents for Valor G Jet
















Reviews: