background image

    SWITCH                                     

  

SWITCH                                                                                             WASTE PUMP SWITCH                                     

  

LAMP 

    POWER                                        CYCLE                                                                                                       (OPTIONAL)                                        BOILER READY 

OPERATION 

 

• 

REMOVE ALL DEBRIS FROM THE GLASSES TO BE WASHED, BEFORE PLACING THEM INTO THE BASKET. 

• 

CLOSE THE DOOR, PRESS THE 

CYCLE SWITCH

 - THE CYCLE LAMP WILL COME ON. 

• 

AT THE END OF THE

 

CYCLE THE CYCLE LAMP WILL GO OUT - OPEN THE DOOR AND PULL OUT THE BASKET. 

• 

ALLOW EXCESS WATER TO RUN OFF BEFORE REMOVING. 

PREPARATION 

 

• 

CHECK 

DRAIN PLUG 

IS

 

PUSHED

 

FIRMLY IN PLACE AND 

FILTERS

 ARE PROPERLY SECURED WITH THE FILTER NUT.

 

• 

CHECK 

DETERGENT

 ( RED ) AND 

RINSE AID

 ( CLEAR ) SUPPLY TUBES, WITH 

FOOT VALVES 

- ARE 

 

       SUBMERGED IN SUFFICIENT PRODUCT.

 

• 

CHECK THE DOOR IS CLOSED AND PRESS THE 

POWER

 

SWITCH

 - THE POWER GREEN LAMP WILL COME ON. 

• 

ALLOW 20 MINUTES FOR THE MACHINE TO REACH THE CORRECT WASHING TEMPERATURE. 

OPERATING AND MAINTENANCE INSTRUCTIONS 

 

DC035/DC040 

ROUTINE MAINTENANCE 

 

• 

AT THE END OF A SESSION TURN OFF THE 

POWER SWITCH 

- DO NOT REMOVE ANY FILTERS AT THIS STAGE. 

• 

REMOVE THE 

DRAIN PLUG 

- THE WASH TANK WILL EMPTY. 

• 

IF YOUR MACHINE IS FITTED WITH A WASTE PUMP - TURN OFF THE 

POWER SWITCH 

AND

 

REMOVE THE 

 

       DRAIN PLUG

 - THEN PRESS AND HOLD THE 

WASTE PUMP SWITCH 

UNTIL THE WASH TANK IS EMPTY.        

 

• 

CLEAN AROUND THE WASH TANK, DOOR SURROUNDS AND HINGES WITH AN 'ADDIS'’ TYPE WASHING UP BRUSH. 

• 

COLLECT THE DEBRIS AND REMOVE FROM THE WASH TANK. 

• 

UNSCREW THE

 FILTER NUT 

- TAKE OUT THE 

FILTER 

- CLEAN THOROUGHLY AND REPLACE - SECURING WITH THE     

FILTER NUT

• 

DO NOT ALLOW DEBRIS TO GO DOWN THE OUTLET HOLES  AS THIS MAY DAMAGE YOUR MACHINE. 

• 

REGULARLY CHECK 

RINSE JETS 

AND

 WASH JETS

 ARE CLEAR OF DEBRIS OR LIME SCALE - REMOVE IF NECESSARY BY 

UNSCREWING THE 

RINSE ARM NUT

 - REMOVE WASH ARM 

CLEANING CAPS

 - CLEAN THOROUGHLY AND REASSEMBLE. 

• 

YOUR WATER SOFTENER ( IF FITTED ) SHOULD BE REGENERATED ONCE A WEEK OR ACCORDING TO INSTRUCTIONS.        

SERVICE TEL. 

directcateringproducts.co.uk

 

SERVICE CALLS TO RECTIFY FAULTS CAUSED BY `THE LACK OF ROUTINE MAINTENANCE` WILL BE CHARGED FOR 

AND YOUR WARRANTY MAY BE AFFECTED 

RINSE ARM NUT

 

RINSE JETS 

 

WASH JETS 
 

CLEANING CAP 

DRAIN PLUG 

FILTER  (OPTIONAL) 
FOR WASTE PUMP 
MACHINES ONLY 

FILTER  

FILTER NUT

 

OUTLET HOLES 

FOOT VALVES

 

Reviews: