Home
/
DBL Technology
/
GoIP-1
/
User Manual

DBL Technology GoIP-1, User Manual, Page: 55 / 69

Share

40 pages before
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69

Page: 55 / 69

DBL Technology GoIP-1 User Manual Download Page 55

DBL Technology Co., Ltd.

GoIP User Manual

www.dbltek.com

Technical Support: [email protected]

55

Click [Back] to return to the Send USSD command page.
For certain service requests, user responses are required. Just following USSD message and then send
back a response via SEND USSD command.

5.4.4

Send SMS

Click [Send SMS] to access the Send SMS webpage as shown below.

.

The procedures to send a SMS are:
a)

Select the Line (GSM channel) that you want to send a SMS. The line status and the SIM (GSM)
number are displayed. The last option "All Lines" means that all channels are selected and the same
SMS is sent via all channels provided that they are in the Login Status.

b)

Enter the recipient’s phone number (GSM)

c)

Type the SMS message in the SMS Content box. The maximum length of a message is 140 characters
for 7/8-bit ASCII code and 70 characters for 16-bit Unicode) .

d)

Click [Send] to send out the SMS.

5.4.5

SMS InBox

Click [SMS InBox] to view the SMS messages received as shown below. Select the desired line to view
the latest 10 messages received for the corresponding GSM channel.

https://arttel.ru/

https://arttel.ru/shop/gsm-shlyuzy/gsm-shlyuz-goip-4

«
...
53
54
55
56
57
...
»

Summary of Contents for GoIP-1






































































Reviews:

No comments