WARNING:
This product is part of a personal fall arrest,
restraint, work positioning, climbing, controlled descent,
or rescue system. The user must follow the manufacturer’s
instructions for each component of the system. These
instructions must be provided to the user of this equipment.
The user must read and understand these instructions before
using this equipment. Manufacturer’s instructions must be
followed for proper use and maintenance of this equipment.
Alterations or misuse of this product or failure to follow
instructions may result in serious injury or death.
IMPORTANT:
If you have questions on the use, care, or
suitability of this equipment for your application, contact
Capital Safety.
IMPORTANT:
Record the product identi
fi
cation information
from the ID label in the inspection and maintenance log in
Section 9 of this manual.
DESCRIPTIONS:
The ExoFit NEX™ Full Body Harness is available in Vest (Figure 1)
and Cross-Over (Figure 2) styles con
fi
gured with a variety of
features including the following:
•
Tech-Lite™ Aluminum D-Rings - Varied Locations: Front, Back,
Hips, Shoulders
•
Duo-Lok™ Quick Connect Buckles
•
Repel Technology Webbing
•
Hybrid Comfort Padding
•
Revolver™ Vertical Torso Adjusters
•
Tongue Buckle Body Belt
•
Suspension Trauma Straps
NOTE:
Some features may not be available on all models of
the ExoFit NEX™ Full Body Harness.
ExoFit NEX™
Full Body Harness
Model Numbers:
(See back pages.)
USER INSTRUCTION MANUAL
EXOFIT NEX™ FULL BODY HARNESS
This manual is intended to meet the Manufacturer’s Instructions as required by ANSI Z359 and
CSA 259.10 and should be used as part of an employee training program as required by OSHA
