SmarTalk User Guide
Answering
37
Retrieving Messages
Whenever the message light at the top right of SmarTalk
is flashing, you have at least one message. Other
stations in your group can leave a call-me message and
turn on your message light. If you subscribe to voice mail,
the message light flashes when you have one or more
messages.
To display messages:
1. Press
Messages
to display the first message.
The display shows
Message from: name
The displayed station or voice mail service wants you to
call.
2. Hold down to see the time and date of the call.
3. Press to display other messages.
To delete a displayed message, press
Shift
,
Del
.
To call the station in the displayed message, press
Dial
.
The message is automatically deleted.
To call voice mail, dial the number of your custom-calling
or Centrex service. Your installer can set up SmarTalk so
that you can press
Dial
to call your voice mail service
when the voice mail message is displayed.
If you want the message light to go on when you miss
calls, contact your installer to set this up.
Tip
If the message light doesn’t go out after you’ve picked up
all of your messages, it’s probably because the signal
didn’t arrive from the telephone company. Just delete all
message notices to get rid of the flashing light.
