22
Cod. 420120298 REV. 1.0
VIO X205
FEATURES OF THE AMPLIFIER AND CONTROL SECTIONS
The DIGIPRO G3 amplifier provides 400 W RMS. The system
is silent and does not require a fan cooling. The system is
controlled by a dedicated powerful DSP that manages the
different parameters.
The DIGIPRO G3 panel is made up of:
ATTENTION
!
•
Protect the unit from moisture.
•
Never attempt to disassemble the amplifier in any way.
•
In the event of a malfunction, remove power supply
immediately by disconnecting the unit from the power
mains and contact an authorised repair centre.
• Input, Output and Control Section
•
Power Supply Unit Section
•
Never remove the front grille protecting the product.
To prevent the danger of electric shock, in case of accidental damage or replacement of the
protection grille (to be carried out at the service), disconnect power supply immediately.
Never connect mains power supply when the grille is removed.
ATTENTION
!
