▪
The owner of the machine (customer) must ensure that it is always used in perfect condition. In this
regard, always keep the device clean and periodically perform visual checks on the outside of the
device, on the power cord and on the charging plug, looking for any damage or residual dirt.
▪
If the column is damaged ,it must be immediately disconnected and replaced.
▪
The charging station should only be used to charge electric vehicles and plug-in hybrids. Do not
connect with other electrical devices.
▪
The product does not have its own grid switch. The disconnection from the electric grid takes place
through the device connector and the magnetothermal switch of the building system.
▪
Do not use extension cords to connect the device to the electric grid.
▪
Make sure that the power supply cable of the wallbox is not damaged mechanically (by bending or
crushing it with the vehicle). After use, place the plug in the connector holder.
▪
Be careful not to damage the charging station.
▪
Daze Technology srl assumes no responsibility for any damage to the body of the product due to
accidents.
▪
The use of the machine in an explosive atmosphere is not permitted.
▪
The modification of parts of the components or the addition of optional equipment to the device is not
permitted.
▪
Do not remove any labels such as safety symbols, cable codes or nameplates.
▪
During operation, the device cannot be exposed to direct radiation such as sunlight, as these can
produce overheating of the internal environment, where the electrical equipment is located, degrading
the insulating materials.
▪
The degree of protection of the machine is IP54; that is, the environment of use must be clean, in the
absence of dust or vapors.
1.4. Warranty
Daze Technology srl guarantees the regular operation of the machine (as long as it is used in the conditions
of intended use) for the period established in agreement with the DazeTechnology srl Sales Office and
regularly registered in the sales contract.
Daze Technology srl guarantees all its machines from factory defects for a period of 24 months starting
from the delivery date. This guarantee consists in restoring efficiency, through free replacement or repair,
of items that are unusable or inefficient due to factory defects and / or assembly errors. This warranty is
void if the defect can be connected with:
●
Failure to perform the minimum maintenance interventions prescribed in the manuals.
●
Carelessness.
●
Accidents.
●
Late complaint of the defect.
●
Improper use.
●
Unauthorized modification.
●
Repair with non-original spare parts.
For each component sent to Daze Technology srl for inspection, repair or replacement, whether to be
performed free of charge or against payment if the warranty period has expired, the Customer must
compulsorily complete a document with the identification data of the machine and the largest number of
information relating to the fault. This will improve the "Customer Service" and minimize the costs and time
required for the revision or replacement of defective parts.
We emphasize that if we do not receive the defective part, no later than 30 days from the shipping date of
the new spare part, we will automatically proceed with billing.
4
ENG - June 2020 - Rev. 1