6. Visual signals and alarms
The LED frame notifies the user of the status of the DazeBox. The colors and statuses are shown in table
6.3.
Colore
Stato
Descrizione
Green
Not connected
DazeBox is not connected to the vehicle
Blue
Charging
Vehicle is being charged
Yellow
Waiting PM
There is not enough current available to start charging
the vehicle..
Green + Blue
Connected
DazeBox is connected to the vehicle but not charged
(vehicle fully charged or not available to recharge)
Red
Error
In case of error, refer to table 6.4
Tabella 6.3. Statuses Led.
With flashing red LEDs, DazeBox is in an error state. Each error is associated with a corresponding number
of short consecutive flashes. In case of error, contact support.
Numero lampeggi
Errore
2
Temperature to high
5
Error on vehicle side
6
Generic error
8
Overcurrent
Table 6.4. Error codes
7. Disposal
This chapter explains how to deactivate and dismantle the machine, indicating the residual risks that occur
in these situations and the necessary precautions to neutralize these risks.
Once the end of its technical and operational life has been reached, the machine must be deactivated, or
taken out of service.
Switching off the electricity power supply
Disconnect cable from the machine side and the fabricated side. Before starting the procedure, check that
the terminal of the power supply grid is not live.
19
ENG - June 2020 - Rev. 1