CBT36K Assembly Manual
2.2.
A
UDIO
M
EASUREMENT
T
OOLS
:
The following software tools, equipment, and supplies will help in the measurement and testing of the
CBT36 arrays.
2.2.1. Stand-Alone Generators:
It would help if you have on hand an audio generator or function generator such as the following (listed
without descriptions and lifted from Google Images. You old timers may remember some of these
generators!):
2.2.2. Signal Generator Free-Software Options:
2.2.2.1. David Taylor Audio SweepGen Signal Generator:
http://www.dxzone.com/cgi-bin/dir/jump2.cgi?ID=17725
This generator is free on the Internet and is easy to use. It will generate continuous sine/square signals
plus log/linear stepped/continuous sweeps from arbitrary start-stop frequencies.
2.2.3. Speaker Connector Cable and Wiring Options:
2.2.3.1.
Do-it-Yourself Speaker Cable:
http://www.parts-express.com/neutrik-nl4fc-speakon-connector-4-pole-cable-mount--092-050
If you wish to construct your own test cable or your own a pair of speaker cables, order two of the Neutrik
Speakon NL4FC four-wire speaker connectors for the CBT36 connection and the appropriate four-
conductor 16 AWG or larger cable and connectors to mate with your power amplifier.
2.2.3.2.
Speakon Connector Wiring and Documentation:
http://www.n4tze.com/speakonconnectorwiring.pdf
This document will help explain the Speakon NLF4C connector and its wiring.
Page
9
of
89