CBT36K Assembly Manual
Page
8
of
89
2. WHAT’S NEEDED?
2.1.
T
OOLS AND
C
ONSUMABLES
N
EEDED
:
In addition to the items supplied with the kit you will need some basic tools and consumables to complete
your CBT36 kit. Refer to the lists below and the following photos for a quick overview of the required tools
and consumables (
NOTE:
Painting supplies are shown in the cabinet finishing section of this manual).
Fig. 3. Tools and consumables required in the assembly of the CBT36. See the following two
lists for individual items.
2.1.1. Tools:
1) Wire stripper
2) Wire cutters
3) Needle nose pliers
4) 4mm or 5/32 Allen (Hex) tool
5) #2 Phillips screw driver
6) Ratchet with adapter for a Phillips screw driver
7) Sharpie felt tip pen
8) Yard or meter measuring stick
9) Soldering Iron
10) Hot glue gun and glue sticks
11) Test leads
12) 1.5v and two - 9v batteries
13) Single-edge razor blades or Exacto knife and blades
2.1.2. Consumables:
1) Sand paper grits 150, 180, 220, 320, 400
2) Primer
3) Paint
4) Polishing compounds (for automotive finishes)
5) Thin (not a GEL) Super Glue
6) RTV silicone adhesive (not shown)
7) Can of compressed air or air hose with nozzle connected to a compressor
8) Finger nail polish (your favorite color)
9) Electrical tape (not shown)