C. Installing Drivers
Put sealing caulk around the woofers prior to mounting. When applying caulk it is a good idea to first roll the
caulk between your fingers to “thin out” the caulk bead. The tweeter is supplied with a gasket so it does not need
sealing caulk. Putting sealing caulk on the tweeters mounting flange may not allow the faceplate to mount flush
with the baffle.
1. Attach each wire to the appropriate driver terminals while observing proper polarity (positive to positive,
negative to negative). The tweeter has a red paint dot on the positive terminal. If you decide to solder,
be careful not to apply too much heat to the driver terminals especially the tweeters.
Page 15
2. Install the drivers using the #8 (large) screws for the woofers and the #6 (small) screws for the tweeters.
Be careful not to over tighten the screws and strip the wood.
