4SS-VC
Dayton Audio
®
●
PO Box 52
●
Springboro, Ohio 45066
Four Pair Speaker Selector
with Volume Control
Owner’s Manual
© February 2005 Dayton Audio
®
.
Warranty Information:
Dayton Audio
®
products are constructed by industry experts, and are thor-
oughly tested before shipment. Dayton Audio
®
products are warranted for the period of fi ve years.
This warranty is limited to manufacturer defects, either in materials or workmanship. Dayton Audio
®
is not responsible for any consequential on inconsequential damage to any other unit or component
or the cost for installation or extraction of any component of the audio system. In the rare case of a
product failure, please follow this procedure:
•
Call our Customer Support Department at (937) 743-8248 to obtain a Return Authorization #.
•
Package your return carefully to ensure it is received by us in good condition.
•
Include a copy of the invoice with an explanation of the return; include all original factory
packaging, accessories, and manuals/literature.
•
Write the RA# clearly on the outside of your return package.
Warranty Limitations
: There are no other warranties, either express or implied, which extend the
foregoing, and there are no warranties of merchantability or fi tness for any particular purpose. The
warranty will not cover incidental or consequential damage due to defective or improper use of
products. This includes but is not limited to burnt voice coils, overheating, bent frames, holes in the
cone, or broken lead wires.
This warranty gives you specifi c legal rights and you may also have other rights which vary from
state to state.
Non-Warranty Service:
If non-warranty service is required, the product may be sent to the
Company for repair/replacement, transportation prepaid, by calling (937) 743-8248 for details,
complete instructions, and service fee charges.
Trouble Shooting:
Problem Solution
No Sound
Check all connections
Make sure the volume controls are on
Make sure no wires are touching each other
Make sure the receiver/amp is turned on
Make sure the receiver/amp correct speaker source is on
Noise in Speakers
Make sure all speaker wires are away from AC power lines
Check all connections for a tight fi t
Turn down receiver/amp output
Unit is hot
Turn down receiver/amp output
Turn off unused speakers
Do not stack items on top of unit
Number of Speaker Pairs Playing
Impedance Correction
1 2 3 4
(protection at “on” pos.)
4
Ω
X X X
7.0
Ω
4
Ω
4
Ω
X X
5.0
Ω
4
Ω
4
Ω
4
Ω
X
4.3
Ω
4
Ω
4
Ω
4
Ω
4
Ω
4.0
Ω
4
Ω
Speakers
Number of Speaker Pairs Playing
Impedance Correction
1 2 3 4
(protection at “on” pos.)
8
Ω
X X X
11.0
Ω
8
Ω
8
Ω
X X
7.0
Ω
8
Ω
8
Ω
8
Ω
X
5.7
Ω
8
Ω
8
Ω
8
Ω
8
Ω
5.0
Ω
8
Ω
Speakers
All manuals and user guides at all-guides.com
all-guides.com
