Daytona P200T, User Manual

Page: 23 / 60

Chapter 2 - Introduction
No. Name of Part Description
5 Image server
Runs the software which transfers patient images from the scan head to the
review client.
6 Customer network
Switches, Firewalls, Internet access, Review clients, Virtual image server (if
required).
7
Patient
environment
The image server, switch, browser-based review clients and any Viewing PCs or
monitors must be positioned outside the patient environment; more than 1.5
meters (5 ft) from the scan head.
Note
The device also includes a user guide, dust cap, power cable and ethernet cable not shown on this
diagram.
A table may also be supplied.
2.6.2 Network specification and characteristics
The following network specification is recommended when connecting the image server to a Wide Area
Network (WAN).
TABLE 1: Network specification
Network specification details
Installation Scan head and image server PC
Connection type LAN TCP/IP ipV4
Connection speed 1 Gbps recommended
Connection security All transport HTTPS by default
Connection ports (defaults) 443, 56620
Unused ports Locked on scan head and image server PC
Page 23 of 60
Part Number:
G102748/11_ENG
Copyright
2021
, Optos plc. All rights reserved.
English