Page 3
For technical questions, please call 1-888-866-5797.
Item 57664
23. When lifting the entire front end or rear end
of a vehicle, support the load immediately
with two jack stands. Align the saddles of
the jack stands directly under the vehicle’s
frame or recommended lifting points. Also,
adjust the jack stands to the same height.
24. Do not work under the vehicle without properly
supporting the vehicle with jack stands.
25. Avoid dangerous oncoming traffic. Use the Jack
as far away from the roadside as possible.
26. Industrial applications must follow
OSHA requirements.
27. Do not allow anyone in the vehicle while
using the Jack. Keep all bystanders a
safe distance away from the vehicle.
28. Do not support both ends of the
vehicle at the same time.
29. Before lowering the Jack, remove all tools
and equipment from under the vehicle.
30. The warnings, precautions, and instructions
discussed in this manual cannot cover all possible
conditions and situations that may occur. The
operator must understand that common sense and
caution are factors, which cannot be built into this
product, but must be supplied by the operator.
SAVE THESE INSTRUCTIONS.
