v1.0
CAUTION!
- INFLATE TYRE WITH CARE. DO NOT EXCEED
RECOMMENDED PRESSURE. ENSURE SQUARE NECK OF BOLTS ARE
LOCATED IN BOWL DURING ASSEMBLY.
TIP
–
PLACE STRONG TAPE OVER THE HEAD OF THE BOLTS TO HOLD
THEM IN POSITION DURING ASSEMBLY. USE A MALLET TO KNOCK
COMPONENTS INTO POSITION IF NEEDED.
1.
PLACE WHEELBARROW BOWL UPSIDE DOWN OVER A BENCH OR TABLE EDGE.
2.
ASSEMBLE HANDLES “
A
” INTO FRONT FRAME “
B
” AS
PER DIAGRAM. LOCATE ASSEMBLY OVER THE HOLES IN THE
BOWL. INSERT 2 x LONG BOLTS FROM INSIDE THE BOWL AT POSITION 1 AND FINGER TIGHTEN WITH WASHERS & NUTS.
3.
ASSEMBLE LEGS “
C
” TOGETHER
IN A CROSS-PATTERN AT POSITION 2 WITH 1 x SHORT BOLT AND FINGER TIGHTEN
WITH WASHER & NUT.
4.
LOCATE THE LEGS OVER THE BOWL AS SHOWN AND FIX WITH 4 x LONG BOLTS AT POSITION 3 & 4. FINGER TIGHTEN
WITH WASHERS & NUTS.
B
BOWL
WHEEL
C
x2
A
x2
AXLE x1
AXLE SPACER
x2
AXLE
BRACKET
x2
x8
x1
x9
x9
