background image

14

Battery Care

Follow these suggestions to maintain your battery’s optimal performance. If you do not 

follow these suggestions, your battery may lose its ability to maintain a charge and might 

have to be replaced sooner than would otherwise be necessary.

 

• Charge it: Charge your battery immediately after riding it.

 

• Full Charge: Do not allow the battery to run down completely and lie in storage  

 

  without a charge. This signifi cantly reduces the battery’s lifespan and may cause  

 

  damage.

 

• Keep it Charged: When being stored, charge the battery occasionally to make sure 

 

  its power supply does not run down. Charging it once every 21 days should be  

 

  suffi  cient.

 

• Storage Conditions: Store the battery on a fl at, cool, dry surface. Do not allow the 

 

  battery temperature to drop below 10 degrees Celsius for extended periods of  

 

  time.

Warning

DO NOT

 place your Lead-Acid battery on concrete. Concrete drains the battery’s power 

and will neutralize the lead-acid. Placing the battery on concrete for any length of time will 

likely result in the battery being drained of power and possibly losing its ability to store 

electricity.

Summary of Contents for Utility Electric Bike




























Reviews: