DZA50
USER’S MANUAL
AC LINE SPLITTER
01
02
1. SAFETY INFORMATION
Users must read and follow all safety instructions
before using this unit in order to prevent personal
injury or damage to the unit.
1
.
Please check that there is no damage to the unit or
insulation.
2
.
Input should not exceed more than AC 250V, 15A in order
to avoid electrical shock or danger.
3
.
Don’t open the back cover to avoid damaging the insulation.
4
.
Turn off power first before removing the test leads from
the voltage test jacks.
2. GENERAL DESCRIPTION
This instrument is a special accessory for clamp meters
which can be used to measure current conveniently without
breaking the insulation on equipment’s power line. It can
also be used to test the equipment’s working voltage using
a multimeter. It’s an essential tool for safely taking electrical
measurements with little damage to the equipment under
test. Its quality construction and easy to use design is built
according to IEC61010 standards with an overvoltage
category of 250V CAT III.
3. FEATURES
1Safety standard conforms to IEC61010.
2.Maximum input: AC 250V, 15A.
3.Operating temperature: 0~40
°
C;
Humidity:
≤
90%
4.Storage temperature: 10~50
°
C;
Humidity:
≤
90%
5.Dimensions: 161×57×31 mm
6.Weight: approx. 106g
7.Accessories: user’s manual
.
4. SAFETY SYMBOLS
L
N
Important safety information:refer to the user’s
manual
Dangerous voltage may be present
Double insulation
Earth ground
Live wire connection for voltage test
Neutral wire connection for voltage test
DZA50
