-4-
*Keep package materials away from
children as they may be dangerous for
them.
*Be sure that your child does not play with
the product. Do not allow kids to use your
product.
*If power supply cable is damaged, this
cable should be changed by its producer or
its service agency or a personnel who is a
specialist at the same level in order to
prevent a dangerous situation.
If the product does not work:
Before you contact the technical service:
Make sure that the product is plugged in and the electric fuse of the electric wiring is running. Do not
take any action that will damage the product. Before you contact with technical service, check your
cooker hood according to Table 1. If the problem goes on, contact the seller or the most authorized
service.
Cooker-hood does not work
X
X
X
X
X
X
X
X
X
X
-
9
-
Illumination Lamp
does not work
Check electric connection
(
V
oltage of the electric network should be
between 220-240V
, cooker hood should be
connected to grounded plug.)
Check motor switch
(Motor switch should be at on position)
Check lamp switch
(Lamp switch should be at on position)
Check aluminum filter
(Aluminum Cassette Filter should be washed
once a month at normal conditions.)
Check lamps
(
Lamps should be firm.)
Check outlet
(Outlet should be open)
Check Carbon Filter
(Carbon filter should be replaced with a new
one each 2-3 months at the models with
Carbon Filter at normal conditions)
Warning about Transportation and Carriage
*All the materials used at package of your product are suitable for recycling.
*Please comply with the signs on the product's box during transportation.
*Hold the holders placed at sides of the box in order to carry your product.
If you need transportation;
*Keep the original box.
*Carry your product in its original box; comply with the carrying signs on the product's box.
If there is no original package;
*Do not put heavy material on the chimney hood.
*Keep the external surface from bash.
*Pack your product to avoid damages.
Installation, taking off your product from its package:
*Check if there is any deformation on your product.
*Transportation damages and failures should immediately be reported to the transportation
responsible.
*If you notice any damage please report to the seller.
*
Do not allow children to play with packing material!!!
Cooker-hoods air
suction is weak
Cooker-hood does not
direct air out
(at places without chimney)
*
In case of flame, cut power of the cooker
hood and the cooking appliances, cover the
flame. Never use water in order to
extinguish it.
Use “MAX 6 A” fuse at cooker hood
installment for your security.
“CAUTION: Accessible parts may become hot when used with cooking appliances”
''The appliance is not to be used by children or persons with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have
been given supervision or instruction''
Please use the cooker and the product at the same time to enable air circulation. This will have
positive effect on air suction power. We recommend you to operate your product for few minutes
more after the cooking is completed to enable absorption rest of smell and steam.
Usage of 5 Speed Digital Control
Remove protective folio on the inox product after installation.
Speed Selection
The product has 5 speeds of ventilation level. One of 1,2,3,4,5 speeds is
selected in accordance with steam of cooking or fry. Motor is started pressing control button on
the front panel. Speed is increased pressing button, and decreased by pressing button.
Automatic timer (TIMER) is available at the models with electronic remote control. When you press
button more than 2 seconds, timer function will be on for 15 minutes. When the timer is on,
Display will signal and the motor will be off automatically 15 minutes later. Please use the cooker
and the product at the same time to enable circulation. Doing so, air suction power will be affected
positively. We recommend you to operate your product for few minutes more after the cooking is
completed to enable absorption rest of smell and steam.
TOUCH BUTTON POSITIONS
Illumination
The product has 2 lamps and one lamp button to operate illumination. Press lamp button in
order to start illumination.
