daviteq iConnector STHC, User Manual

Page: 13 / 30

iConnector need to be configured initially before operation, by using a configuration cable as below:
Item code Description
RS485-FM12-USB-1
RS485/USB multi-purpose Configuration cable with connector m12 male, female and
flying leads, with Power adapter 12VDC/2.0A
Below picture is illustration of this configuration cable.
III. Offline configuration for
iConnector
iConnector need to be configured properly so that it is able to connect to Globiots Server successfully;
3.1 Preparation
3.1.1 Configuration Cable
The configuration cable has 04 connectors:
* 1st-connector is M12-F connector with 4 pin inside (A, B, PWR & GND): to connect the RS485 port of
iConnector;
* 2nd-connector is M12-M connector with 4 pin inside (A, B, PWR & GND): to connect to other devices with
RS485 port, but its connector is M12-F;
* 3rd-connector is USB Type A plug: this is to connect to the USB port of Computer;
* 4th-connector is DC Socket 5.5 mm for Powering the converter circuit and iConnector or other device
connected to this tool. This DC jack will be plugged by the plug of AC Power adapter. AC power adapter can be
12V/2A or 24VDC/1A;
* There is a flying lead with Connector M12 to allow customer connect to other device with RS485 port but no
M12 connector, like IO Module (SKU# STHM-)....