background image

Products #6450 and #6490 

UV and Solar Radiation Sensors

For Vantage Pro

®

 and Vantage Pro2

 Weather Stations

The Davis Instruments UV Sensor is a precision instru-
ment that detects ultraviolet (UV) radiation at wave-
lengths of 290 to 390 nanometers. The spectral 
response is closely matched to the Erythema Action 
Spectrum, defined by McKinlay and Diffey (1987) and 
internationally recognized as the radiation that is most 
responsible for causing redness of the human skin.

The Davis Instruments Solar Radiation Sensor is a pre-
cision instrument that detects radiation at wavelengths 
of 300 to 1100 nanometers. The spectral response of 
the silicon photodiode detector is a good match to the 
spectrum of solar irradiance.

Typically, users install both the Solar Radiation Sensor and the Davis UV Sensor. How-
ever, users may install only one of these sensors. Unless otherwise noted, instructions 
in this manual apply to both sensors.

Individual specifications for each sensor are listed on the Davis Website at 
http://www.davisnet.com/support/weather/ under the spec sheets link. 

Note: 

Sunburn is not the only consequence of exposure to UV radiation. Skin cancers, cataracts, and dam-
age to the immune system are caused by UV radiation. Exposure to UV radiation should be mini-
mized. 

The UV Sensor is comprised of the following components:

Shield

—The outer shell shields the sensor body from thermal radiation and provides a 

path for convection cooling of the body, minimizing heating of the sensor interior. It 
provides a cutoff ring for cosine response, a level indicator, and fins to aid in aligning 
the sensor with the sun’s rays.

Sensor Body

—Houses the following components:

Diffuser

—Provides, with gasket, a weather-tight seal and excellent cosine response.

Filter

—Provides the Erythema Action spectral response. Encased in multiple hard-

oxide coatings, the filter is stable in the presence of heat and humidity.

Detector

—Contains a semiconductor diode that, with the filter, responds to radia-

tion only in the specified wavelengths.

Amplifier

—Converts the detector current into a 0 to +2.5V signal.

The Solar Radiation Sensor is comprised of the following components:

Shield

 —Serves the same role as in the UV Sensor. 

Sensor Body

 —Composed of a shield, the same as that in the UV Sensor; and a sensor 

body, which contains a precision machined diffuser giving excellent cosine response; a 
hermetically sealed silicon photodiode; and an amplifier. 

Reviews: