Davis Instruments GroWeatherLink, User Manual

Page: 50 / 108

U
S I N G T H E
S
O F T W A R E
Setup Menu
43
Set Alarms
You may quickly set the thresholds for the station’s alarms using the software.
The software also includes two “user alarms” which may be turned on and off
from the software. These two alarms are for use with the Alarm Output Module
and may be used to manually start or stop an external device.
1. Choose Set Alarms from the Setup menu.
The Set Alarms dialog box appears.
S
ET
A
LARMS
2. Enter the following information:
▲
High/Low Alarm
For all of the standard high/low alarms, enter the desired alarm threshold
into the text box. To clear an alarm, delete the contents of the text box.
▲
Dew Point
Turn on the dew point alarm by selecting the check box. Clear the alarm by
“de-selecting” the check box.
▲
Barometer
Select the desired change per hour which will trigger the barometer alarm.
To clear the alarm, select Off.
▲
Time
Enter the time at which the alarm should be triggered into the text box.
▲
User Alarms (1 & 2)
These alarms allow you to trigger a device connected to the Alarm Output
Module manually. To turn on either alarm, select the desired check box.
Keep in mind that you will need to manually shut off this alarm.