Davin J012, Service Manual

Page: 185 / 365

• The best pattern is the gray square with straight vertical lines on both sides.
• The pattern setting is read as a matrix value from the pattern. For example, if the best pattern is
in column "+2", line "A", the entry for adjustment will be "A" then "+2"
7. [

] > "Adjust" > [Yes].
*A B C
 ,  & Yes
8. [  ] or [  ] > Select letter for the row (A, B, C)> [Yes]
Adj=0
OK=Yes
9. [  ] or [  ] > Select the number for the column
•

to select a + value
•  to select a – value
10. [Yes] > "Adjust"
11. [No] > "Cancel?" > [Yes]> Standby
Registration
Do this procedure to adjust the print start position. The print start position is the point at the upper left corner
of each sheet where printing begins. This procedure can be done for all the paper feed sources: Tray 1
(Standard), Tray 2 (Option), Multi-Bypass Tray (Option).
1. [Menu]> "System Settings?"
2. [
 ] or [  ] > "Maintenance?" > [Yes]> "1 Nozzle Check?"
3. [  ] or [  ] > "6 Registration" > [Yes].
4. [  ] or [  ] > "Print Test Pattern?" > [Yes].
5. [

] or [

] > Select the paper tray ("Tray 1", "Tray 2" or "Bypass") > [Yes].
• "Tray 2" and "Bypass" do not appear unless these options have been installed. .
6. [  ] or [  ] > Select the type of paper loaded in the tray ("Plain, "Glossy", "Transparency", etc) [Yes].
"*Please Wait*" displays until pattern printing is finished. Do not start any other operation until printing
stops.
4. Troubleshooting
184
4