Davin J012, Service Manual

Page: 184 / 365

6. [  ] > "Adjust" > [Yes]
Adj=0
OK=Yes
7. [  ] or [  ] > Select the adjustment value read from the test print
•

to select a + value
•  to select a – value
8. [Yes] > "Adjust"
9. [No] > "Cancel?" > [Yes]> Standby
Head Position
The print head is out of position if you see these:
• Broken vertical lines
• Blurred, smeared or streaked colors
Do the following procedure to correct these problems.
1. [Menu]> "System Settings?"
2. [
 ] or [  ] > "Maintenance?" > [Yes]> "1 Nozzle Check?"
3. [  ] or [  ] > "4 Head Position?" > [Yes]> "Print Test Pattern?"
4. [Yes]> "Quality/Speed"
5. [
 ] or [  ] > Select the test pattern ("High Quality", "Quality/Speed", "High Speed") > [Yes].
"*Please Wait*" displays until pattern printing is finished. Do not start any other operation until printing
stops.
6. Look at the patterns and determine which is the best.
Image Correction
183
4