DigaStudio Installation Notes
Page 10 of 15
4.1.6 Program Settings
This page is for generating and loading profiles as described in the following section.
4.2 Configuration via profiles
Profiles are „snapshots„ of particular system settings. Any system state can be saved and reloaded at
any time. In this way any number of general or user-specific profiles can be generated.
4.2.1 Creating and saving profiles
The „Program Settings„ page in the DigaStudio Configuration Manager (DigaStudio Parameter Setup)
allows for the saving and loading of user or global profiles.
To create a profile simply enter any name for the profile in the title field, then click on the SAVE button,
and the current state of the DigaStudio will be saved in the current section (user or global).
To load a profile mark the required profile from either the user or global section on this page and then
click on the LOAD button.
4.2.2 Loading profiles
By clicking on the left button of the DigaStudio
Manager the profile selection window is started.
Select a profile from either the user or global sec-
tion and then click on OK to load and activate it.