DigaStudio Installation Notes
Page 6 of 15
4. Click on the COM port button. A
window for RS-232 properties ap-
pears. Enter the paramters as
shown here. Make sure that you
choose the correct COM port, that
is, the one on the PC to which the
interface cable is connected. As a
rule this will be either COM1 or
COM2. When you have finished
entering all the necessary parame-
ters click on the OK button.
5. If the correct COM port has been selected then immediately after clicking on the OK button you
should receive the message „Serial thread started!„ in the output area of the DigaStudio Interface
Manager. If this is not the case then either the false COM port was selected or a resource conflict
exists (another application is using the COM port). If necessary correct the situation by repeating
step 4.
6. Close the window by clicking on the HIDE button. The icon should still be visible in the
system tray.
7. If required you should put a shortcut to the DigaStudio Interface Manager in the Windows
Autostart folder so that the program is started automatically when the PC is started. Follow the
instructions in the Windows manual if you do not know how to do this.
8. The DigaStudio Interface Manager can also be shut down via the CLOSE button in the context
menu (see step 3) should, for example, the serial interface be required by another program.
The PC software is now installed and ready for operation. Also, if you require, you can put a shortcut to
the DigaStudio Manager (program file DIGASTUDIO.EXE) on your desktop. This makes starting the
DigaStudio Manager more convenient.