7
ASSEMBLING THE VACUUM
Fig. 1
Fig. 2
®
Attaching the Cord Retainer to
the Handle
• Pull apart the rounded end of the cord
retainer to open it up enough to fit
around the carry handle (Fig. 1).
• Attach the cord retainer around the
carry handle.
• Create a loop in the power cord and
push it through the slot and over the
hook of the cord retainer.
• Pull down on the power cord to remove
any slack.
Unwinding the Power Cord
• The lower cord hook rotates to allow
for quick access to the power cord (Fig.
2). Turn the lower cord hook upward
and you can quickly drop the power
cord to the floor without unwinding it
from the cord hooks.
• When storing the vacuum cleaner, turn
the lower cord hook to the downward
position and wind the power cord
around the cord storage hooks.
ZM-700.DV_0422_converted 7
ZM-700.DV_0422_converted 7
6/29/22 3:37 PM
6/29/22 3:37 PM