DAVID COMMERCIAL ZM-700.DV Owner'S Manual Download Page 3

3

SAVE THESE INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appliance, basic precautions should always be 
followed, including the following:

READ ALL INSTRUCTIONS BEFORE USING THIS 

APPLIANCE.

IMPORTANT:

 The manufacturer cannot accept responsibility for 

damage caused when the appliance is not used according to the instructions, or for 
uses other than those for which it was intended. 

WARNING:

 To reduce the risk of fire, electric shock, damage or injury:

•  Do not leave appliance when plugged 

in. Unplug from outlet when not in use 

and before servicing.

•  

WARNING:

 ELECTRIC SHOCK COULD 

OCCUR IF USED OUTDOORS OR ON 

WET SURFACES.

•  Do not allow to be used as a toy. Close 

attention is necessary when used by or 

near children.

•  Use only as described in this manual.

•  Do not use with damaged cord or plug. 

If appliance is not working as it should, 

has been dropped, damaged, left 

outdoors, or dropped into water, return 

it to the distributor where purchased 

for service.

•  Do not pull or carry by cord, use cord 

as a handle, close a door on the cord, 

or pull cord around sharp edges or 

corners.  Do not run appliance over 

cord. Keep cord away from heated 

surfaces.

•  Do not unplug by pulling on cord. To 

unplug, grasp the plug, not the cord.

•  Do not handle plug or appliance with 

wet hands.

•  Do not put any object into openings. 

Do not use with any opening blocked; 

keep free of dust, lint, hair and anything 

that may reduce air flow.

•  Keep hair, loose clothing, fingers and all 

parts of body away from openings and 

moving parts.

•  Do not pick up anything that is burning 

or smoking, such as cigarettes, matches 

or hot ashes.

•    Do not use without vacuum bag in place.

• Turn off all controls before unplugging.

• Use extra care when cleaning on stairs.

•  Do not use to pick up flammable or 

combustible liquids such as gasoline or 

use in areas where they may be present.

•  Do not attempt to service the unit while 

appliance is plugged in.

•  Connect to a properly grounded outlet 

only. See Grounding Instructions.

•  Make sure your extension cord is in 

good condition and is the correct 

size for your appliance, i.e. 16 AWG. 

If in doubt, use the next heavier 

gage. The smaller the gage number, 

the heavier the cord. An undersized 

extension cord will cause a drop in 

line voltage resulting in loss of power 

and overheating.

•  Use only three-wire outdoor extension 

cords that have three-prong grounding 

plugs and grounding receptacles that 

accept the appliance’s plug.

•  Warning - To reduce the risk of 

personal injury due to a loose electrical 

connection between the appliance’s 

plug and extension cord, firmly and 

fully attach the appliance plug to the 

extension cord. Periodically check the 

connection while operating to ensure 

it is fully attached. Do not use an 

extension cord that provides a loose 

connection. A loose connection may 

result in overheating, fire, and increases 

the risk of a burning.

•  To reduce the risk of disconnection of 

the appliance cord from the extension 

cord during operating, secure the 

extension cord to the appliance plug as 

shown or described in the Operating 

Instructions

ZM-700.DV_0422_converted   3

ZM-700.DV_0422_converted   3

6/29/22   3:37 PM

6/29/22   3:37 PM

Summary of Contents for COMMERCIAL ZM-700.DV





















Reviews: