11
MAINTENANCE AND CARE
Fig. 1
Fig. 2
Removing and Reinstalling the
Bottom Plate
WARNING!
To reduce the risk of
electrical shock or injury from moving
parts, unplug before servicing or
cleaning.
To Remove the Bottom Plate:
• Press the handle release pedal to place
the vacuum cleaner in the flat position.
• Turn the vacuum cleaner over, exposing
the bottom plate.
• Turn the two screws a quarter turn to
release the bottom plate (Fig. 1). Remove
the bottom plate.
• Reinstall the bottom plate by aligning the
front edge of the bottom plate into the
notches inside the nozzle housing (Fig. 2).
• Press the bottom plate into position until
the plate “clicks” on both sides. Tighten
the two screws a quarter turn to secure
the bottom plate.
ZM-700.DV_0422_converted 11
ZM-700.DV_0422_converted 11
6/29/22 3:37 PM
6/29/22 3:37 PM