background image

MODELS

VORTEX: 

TF180S & TF230S

Suffix: 

M = Manual

Voltage:  220/240V 50Hz Single Phase
Max. Total Head: TF180S = 5m 

 

TF230S = 8m

Sump Pump

Installation and

Operating Instructions

These Instructions must be delivered with the pump to the operator.

The oil in the seal chamber should be periodically checked and replaced. This work should be done 

by a suitably qualified Service Dealer every 2,000hrs of operation or every 12 months, whichever 

occurs first.

Children should be supervised to ensure that they don’t play with appliance.

CAUTION:  This pump MUST be installed with a suitable earth leakage circuit 

breaker (E.L.C.B.) or residual current device (R.C.D.) with a rated residual operating 

current <30mA.

This appliance is not intended for use by persons (including children) with reduced physical, 

sensory or mental capabilities, or lack of experience and knowledge, unless they have been given 

supervision or instruction concerning use of the appliance by a person responsible for their safety.

TotalFlo

Summary of Contents for TotalFlo TF180S

Page 1: ...eration or every 12 months whichever occurs first Children should be supervised to ensure that they don t play with appliance CAUTION This pump MUST be installed with a suitable earth leakage circuit breaker E L C B or residual current device R C D with a rated residual operating current 30mA This appliance is not intended for use by persons including children with reduced physical sensory or ment...

Page 2: ...ced on a solid flat surface if not available sit the pump on timber or house bricks in the vertical position Pump should always be installed so that it will be clear of settled silt or debris It is recommended to fit the biggest diameter hose possible to obtain the best flow from the pump To remove or lift the pump from deep wells or pits connect a rope to the handle during installation Automatic ...

Page 3: ...re is too high Pump operating in non submerged position or with no water movement around motor Electrical fault Do not run the pump dry as this will damage the seal and reduce the life of the pump Where hair lint or other string like material may be in the water the pump should be regularly checked It might become necessary sometimes to clean the suction strainer impeller and or discharge pipework...

Page 4: ...Instructions not been installed in accordance with the specified instructions or by suitably qualified personnel been modified or altered from original specification had repairs attempted or tampered with in any way been subject to conditions such as incorrect voltage supply lightning or high voltage spikes or damage or breakdown from exposure to electrolytic action cavitation sand corrosive salin...

Reviews: