2: Installation
PRC1099A-MSOP
2-7
100W System
The PRC1099A can be used in a 100W mobile configuration with the RA100
power amplifier as shown below. 12V or 24V operation is possible in this
configuration; make sure the RA100 and MT-1099A are the proper 12V or
24V model.
1. Attach the battery box to the PRC1099A.
2. Slide the PRC1099A into the MT-1099A mount and clamp in place.
3. Attach the RA100 amplifier to the MT-1099A mount (requires the
RA100-MM).
4. Attach the RAT7000B automatic antenna tuner to its shock mount, then
mount to the vehicle immediately next to the vehicular antenna.
5. Connect the cables as shown.
Figure 2-4. Mobile 100W System
For 12V vehicles, use the MT-1099A-12 and RA100-12
For 24V vehicles, use the MT-1099A-24 and RA100-24
Note:
RA-MAS
MT-1099A
DC Power
Source
C991580
C991588
C992301
C991505
J3
J2
J3
ACC
ANT
C991949
J1
J2
J4
J1
C991620
C991575
C991585
J5
J4
PRC1099A
RF IN J1
RAT7000B
RA100
Cable
Description
C991505
RA100 to RAT7000B, RF cable
C991575
PRC1099A to RA100, RF cable
C991580
External DC power to MT-1099A, power cable
C991585
MT-1099A to RA100, control cable
