9
3.3.4 System parameters:
Device name:
When there are multiple print servers in the network, it is recommended to modify the device
name, which can be quickly found when the mobile phone searches for the print server.
Print transfer mode settings:
The system defaults to output directly to the printer. When the printer has higher
requirementsfor data transmission, you can choose to output it to the printer after receiving it.
Modify the MAC of the network port :
The MAC addresses of the network ports of the print server are all the same when they leave
the factory . When there are multiple network cables connected to the print server in the
network, the MAC address needs to be modified to ensure that the MAC address is not
repeated. Otherwise, the network of the print server will lose serious packets. Even the
possibility of network failure. If you use WIFI to network, you don't need to worry about it.
USB port configuration:
NP330 only supports one USB interface, which is USB0 , and the system defaults to 9100. The
user can modify this port. When the user modifies, it needs to be modified on the port page of
the printer driver.
NP332 can support up . 3 th USB interface, the corresponding port is USB1 , USB 2 , USB3 , then if
only one printer, the access USB1 in. This 3 Ge USB port number can not be re-copied.
Range of changeable port numbers: 9100~65535
