Datex-Ohmeda S/5 FM, User Manual

Page: 33 / 94

31
31
Screen setup
Modifying the screen temporarily
•
Press the
Monitor Setup
key and select Screen 1 Setup .
Change the waveform and digit field measurements, split screen
option, minitrend length and sweep speeds.
•
To make other setup changes, such as scale changes, press a
parameter key and select its setup menu. For example, press the
ECG
key and select ECG Setup .
Changes are valid until the monitor is turned off (+15 minutes) or until
you discharge the patient from the monitor. Only time and date
settings are stored permanently.
Modifying the screen permanently
You can make permanent changes in the screen setup. This is
described briefly in the section “Setting up the monitor before use.”
For information on default configuration, refer to the “Default
Configuration Worksheet.”
Changing the split screen contents
You can split the Normal Screen page into two parts. The other half of
the split screen shows trend or ST data.
1. Press the
Monitor Setup
key.
2. Select Screen 1 Setup .
3. Select Split Screen and choose from the options.
•
ST shows current and reference QRS complexes and ST trends.
•
Trend shows minitrends beside waveforms.
•
None shows no split screen.