Datex-Ohmeda F-LM1, Technical Reference Manual

Page: 307 / 377

Spare parts
1 UPGRADE KITS
The monitor can be field upgraded with following options:
Option Description Order code
Mainstream CO
2
Option CO
2
can be measured with mainstream method.
Respiration rate is the frequency of the peak (end
tidal) CO
2
value per minute.
N-LCM
DataCard Option The DataCard is a rewritable flash memory card. With
the DataCard, the patient trend data collected with
the Light Monitor can be transferred to other S/5
monitors. N-LDATA
Network Option When the monitor is connected to network:
−
Time and date are set by the network, and cannot
be adjusted in the monitor.
−
Patients name can be entered in the Patient Data
menu to be displayed on the Information Center’s
(IC) and the monitor’s screen and printed on the
laser printouts.
− Measured and entered patient data can be viewed
on the IC.
− Measured patient data and alarms can be viewed
on other Datex-Ohmeda S/5 monitoring systems,
but not vice versa.
N-LNET
DataCard & Network Option Includes both options described above. N-LDNET
Battery Module Option Enables upto 2 hour monitoring w/o mains power F-LBAT
Thermal Recorder Option Enables waveform and trend recording N-LREC
1.1 Installation Guides
Installation guides for N-LCM, N-LDNET, N-LDATA and N-LNET are attached as appendices at the
end of this document.
Document No. M1051358
1