General Service Guide
3
Document No. 896 623
1.1.2
Conventions used
Throughout this manual, the following conventions are used to distinguish procedures or elements
of text:
?
Sign the performed procedure in the check list.
To help you find and interpret information easily, the manual uses consistent text formats for
certain text types:
Hard Keys
Names of the hard keys on the Remote Controller, Command Board and modules are written in the
following way:
Cancel
.
Menu Items
Menu items are written in bold italic typeface, for example
Location.
‘Messages’
Messages (alarm messages, informative messages) displayed on the screen are written inside
single quotes, for example ‘Learning’.
Chapters
When referring to different sections in this manual, section names are written in italic typeface and
enclosed in double quotes, for example
“Cleaning and Care”.
WARNING
Warnings are written in bold D-O Sans typeface. The font size is 13 points. The
word warning itself is written in capitals.
CAUTION
The font size is 13 points. The word caution itself is written in capitals.
NOTE: Notes are written like this using Bodytext.
Symbols on transport packaging
The contents of the transport package are fragile and have to be handled with care.
This symbol indicates the correct upright position of the transport package.
The transport package must be kept in a dry environment.
This symbol is to indicate the temperature limitations within which the transport package should be
kept and handled.
Symbols on equipment
Ni-Cd
This battery contains Ni-Cd and in case of disposal, must be separated from other
waste according to local regulations.
