background image

 

10.

 

Make sure that the total amperes of all the units that are plugged into a single 
wall outlet do not exceed 15 amperes. 

11.

 

Never push objects of any kind into this unit through the cabinet ventilation slots, 
as they may touch dangerous voltage points or short out parts that could result in 
risk of fire or electric shock. Never spill liquid of any kind onto or into this unit. 

12.

 

Except  as  specifically  explained  elsewhere  in  this  manual,  do  not  attempt  to 
service this product yourself. Opening or removing covers that are marked “Do 
Not Remove” may expose you to dangerous voltage points or other risks, and will 
void your warranty. Refer all service issues to qualified service personnel. 

13.

 

Unplug this product from the wall outlet and refer to qualified service personnel 
under the following conditions: 

a.

 

When the power cord is damaged or frayed; 

b.

 

When liquid has spilled into the unit; 

c.

 

When the product has been exposed to rain or water;   

d.

 

When  the  product  does  not  operate  normally  under  normal  operating 
conditions.  Adjust  only  those  controls  that  are  covered  by  the  operating 
instructions in this manual; improper adjustment of other controls may result 
in damage to the unit and may often require extensive work by a qualified 
technician to restore the unit to normal operation; 

e.

 

When the product has been dropped or the cabinet has been damaged; 

f.

 

When  the  product  exhibits  a  distinct  change  in  performance,  indicating  a 
need for service. 

 

Warranty 

Standard Warranty 

 

Datavideo equipment are guaranteed against any manufacturing defects for one 
year from the date of purchase. 

 

The original purchase invoice or other documentary evidence should be supplied 
at the time of any request for repair under warranty. 

 

The product warranty period begins on the purchase date. If the purchase date is 
unknown, the product warranty period begins on the thirtieth day after shipment 
from a Datavideo office. 

Summary of Contents for WM-10





















Reviews: