Datavideo WM-10, Instruction Manual

Page: 15 / 20

14
For installing PTC-150

For installing PTC-150 series camera to the WM-10, it is recommended that
users can screw the first or the third (13 or 15/16 or 18) screw hole on both
side plates. And then the PTC series camera can be moved forward and
backward by using internal rails which are located at both side plates.

For installing the PTC-150 to the WM-10, please follow following steps.

Step 1. Please make sure that you have the Ceiling Bracket of the PTC-150 in
advance.

Step 2. Please place the Upper Covering Plate of the Ceiling Bracket to the
bottom plate of the WM-10.

Step 3. Please fix the Upper Covering Plate of the Ceiling Bracket to the
bottom plate of the WM-10 by screwing four screws.
13
15
16
18